New 9-inch dust shroud improves production up to 40%

 

Our new 9-inch shroud improves production up to 40% over that of the 7-inch model and uses 8.5″ wheels. 

Belly Saw in action

Yesterday one of our associates went out into the field to demo our Belly Say.

They cut a pipe in a trench, much of it while under water even, and were impressed with the abilities of our saw.

Note too that our Belly Saw Strap was used on this occasion, allowing the operator to focus on the cut without having to worry about the saw itself

Here’s a little collage we put together.

Pipe Bevellers

Sorry for the cell phone pic… but we have bevellers ready to go out!

These pipe bevellers can be attached to grinders and chop saws (with correct mounting plate of course).

Check out this video of the things in action

Head over to our website for more info and ordering

Got Dust?

Then you obviously weren’t using our dustless shrouds.

Our adapters allow them to be mounted to nearly any grinder on the market, but if you give us a call, we’ll come up with an adapter if there isn’t one already.

A standard shop vac attaches to the side exhaust port, and this all you need to keep your work area dust free.

Our Grinder Vac Shrouds are perfect for your dustless needs.

Upcoming…. A Hydraulic Belly Saw!!!!

So you aren’t interested in our air saw, but you’re set up with hydraulics. Problem? Not any more.

Granted, the production ones aren’t quite finished yet, but I can honestly say the prototype was quite nice.

So, that’s a bit more than just a teaser. Rest assured that when these saws hit the shelves they will be a perfect choice for those of you who want to cut a pipe in a trench, safely, with no clearance issues….and now with hydraulic power.

Head back to our website to see our current line of Belly Saws

The Belly Saw

For all you out there who’ve had to cut a pipe in a trench you know how difficult and dangerous it can be. Our saw makes the task that much easier.

Check out a vid here!

Only 7″ inches of clearance are needed.

We even have a strap to attach to it to make the task nearly hands free.

More importantly, there is arguable no safer means of cutting a pipe in a trench. Moving “clamshell” guards ensure that the absolute minimum of the blade is exposed, and its overall design makes it far more manageable. Air Power also means no source of heat or pollution in the trench either.

Anyway, don’t hesitate to contact us for more info, or you can always head over to the company website

Air Chop Saw

14" and 16" variants

Light weight and powerful. It has the benefits of an air motor with no performance loss when compared to conventionally powered competitors.

We use this saw in the same way as we’d use a conventional gas saw, but without having to worry about exhaust fumes and hot parts.